21.5 hp (16.0kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995
Air cooled, 90-degree V-twin, normally aspirated petrol engine.
12-volt (see engine manufacturers specifications)
Spin-on engine oil filter / Total oil capacity 2.1 litres with filter
Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers
11.36 L (3 US gal)
Cartridge air filter
Air cooled. Fly-wheel fan
Dual hydrostatic. Hydro-Gear ZT2100 integrated hydrostatic zero turn transaxles.
V-belt drive from engine crankshaft
Infinitely variable 0-10.5 kph (0-6.5 mph)
0-6.4 kph (0-4 mph)
SmoothTrak twin-lever steering provides independent control of each drive wheel.
Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
True zero turning radius. Turns within its own length. Counter-rotating,
independent drive wheels
In Service: Hydrostatic dynamic braking. Parking: When steering levers are placed
in neutral position, integral park brakes are automatically engaged
11 x 4.0 - 5, rib tread
18 x 8.5 - 8, turf tread
229 kg (505 lbs)
Moulded-vinyl seat. Seat suspension springs are standard.
Mainframe is 3.25" x 1.5" x .120" (8.3 cm x 3.8 cm x .34 cm) channel. Drive motors
mounted to .120" (.45 cm) welded steel. Front caster wheels mounted with commercial duty greaseable roller bearings on each wheel. Front caster forks are 1/4" (6.35 mm)steel.
Seat suspension springs are standard.
Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated
Cup holder moulded into the left side fender. Accommodates nearly any cup size.
39" (990 mm)
73" (1854.2 mm)
44.42" (1128 mm) w/discharge chute up.
41" (1040 mm)
Side-Discharge: 42" cut. (2) Blades, Four-point deck lift. Includes deck-mounted
anti-scalp wheel(s) to improve flotation in rolling and uneven terrain.
42" cut Side Discharge
Foot-operated deck height adjustment.
11 ga, .120" (3.0 mm) welded steel fabricated deck with 14 ga, .075" (1.9 mm)
reinforced spindle mount areas. Solid 3/4" x 1/4" (19.05 mm x 6.35 mm) steel bars reinforce impact areas on trim edges. Steel deck housing is 4.1" (104.14 mm) deep to provide room for high-capacity mowing.
Height adjustment in .25" increments from 1.5" to 4.5" (3.81 cm to 11.43 cm, .6 cm
(2) Heavy-duty blades. 20.50" x 2.25" x .188"
V-belt drive to spindles with electric clutch. Spring tension idler pulleys for
extended belt life.
Die cast aluminium housing, 3/4" diameter high carbon steel shafts and sealed
bearings with triple protection seals.
High density, rubberised.
Optional accessories available for purchase separately include: Mulch Kit: HA124448 - Blades included when purchasing this kit. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. Grass Catcher: HA937441 - 2 bag catcher [non-powered] Hour Meter Kit: HA117703 Arm Rest Kit: HA604436 Extension Arms: HA122760
Specifications subject to change without notice.