l_1588244817.jpg l_1588244817.jpg
5 Review(s)
Warranty : 3 Year Domestic / 1 Year Commercial
Hustler’s all new Raptor is designed to the highest of standards and is poised to lead the zero-turn market in the entry level category, delivering the best-in-class overall value versus the competition. The Raptor is powered by an industry preferr
Availability : In Stock
$8499
Quantity:
Hustler’s all new Raptor is designed to the highest of standards and is poised to lead the zero-turn market in the entry level category, delivering the best-in-class overall value versus the competition. The Raptor is powered by an industry preferred Kawasaki engine and is built with a fabricated steel deck, setting it apart from all other products in its market. The Raptor also features Hustler’s patented SmoothTrak Steering and its Automated Park Brake System. The Raptor is built with the same great quality Hustler has been committed to for almost fifty years and is backed by Hustler’s industry leading three-year warranty* and unmatched customer care.

·       Engine: Kawasaki FR691V

·       HP: 23.0 hp (17.2kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995

Standards.)

·       Type: Air cooled, 90 degree V-twin, normally aspirated petrol engine.

·       Starter: 12-volt

·       Ignition: Electronic

·       Charging System: 12-volt (see engine manufacturers specifications)

·       Oil Filter: Spin-on engine oil filter / Total oil capacity 2.1 litre with filter.

·       Fuel: Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers

specifications)

·       Fuel Capacity: 11.4 L

·       Fuel Filter: Replaceable, automotive-type

·       Air Filter: Cartridge air filter

·       Cooling: Air cooled. Fly-wheel fan

·       Governor: Mechanical

·       Drive System: Dual hydrostatic. Twin Hydro Gear ZT2800 hydro's - serviceable with spin-on filters

.

·       Hydrostatic Drive: V-belt drive from engine crankshaft

·       Ground Speed - Forward: Infinitely variable 0-12.1 kph

·       Ground Speed - Reverse: 0-6.4 kph

·       Steering: SmoothTrak twin-lever steering provides independent control of each drive wheel.

Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.

·       Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating,

independent drive wheels.

·       Brakes: In Service: Hydrostatic dynamic braking.

Parking: When steering levers are placed in neutral position, integral park brakes are automatically engaged.

·       Caster Tyres: 13 x 5.0 - 6, smooth tread

·       Tyres - Drive: 20 x 8.0 - 10, turf tread

·       Weight: 284 kg (628 lbs)

·       Seat: Moulded-vinyl seat. Fore and aft adjustment. Seat suspension springs and armrests

are standard.

·       Construction: Mainframe is 3.25" x 1.5" x .120" (8.3 cm x 3.8 cm x .34 cm) channel. Drive motors

mounted to .120" (.45 cm) welded steel. Front caster wheels mounted with commercial duty greasable roller bearings on each wheel. Front caster forks are 3/8" (9.52 mm) steel.

·       Hour Meter: Standard

·       Seat Suspension: Seat suspension springs are standard.

·       Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated

parking brakes

·       Cup Holder: Cup holder moulded into the left side fender. Accommodates nearly any cup size.

·       Height: 42" (1066 mm)

·       Overall Length: 73" (1854.2 mm)

·       Width: 49" (1244.6 mm) w/discharge chute up.

·       Width (tyre-to-tyre): 41" (1040 mm)

·       Deck System: Side-Discharge: 48" cut. (3) Blades , deck is suspended at two points at the rear

and one in front. Includes deck-mounted anti-scalp wheel(s) to improve flotation in rolling and uneven terrain.

·       Cutting Widths: 48" cut Side Discharge

·       Deck Lift: Foot-operated deck height adjustment.

·       Deck Construction: 11 ga, .120" (3.0 mm) welded steel fabricated deck with 7 ga, .180" (4.6 mm)

reinforced spindle mount areas. Solid 3/8" x 1" (9.52 mm x 25.4 mm) steel bars reinforce impact areas on trim edges. Steel deck housing is 4.5" (114.3 mm) deep to provide room for high-capacity mowing.

·       Cutting Height(s): Foot-operated deck height adjustment.

Height adjustment in 1/4" increments from 1.5" to 4.5" (3.81 cm to 11.43 cm, .6 cm increments)

·       Blade(s): (3) Heavy-duty blades. 16.50" x 2.50" x .20"

·       Blade Tip Speed: 18,600 fpm

·       Blade Drive: V-belt drive to spindles with electric clutch. Spring tension idler pulleys for

extended belt life.

·       Spindles: Die cast aluminium housings with 1" (25.4 mm) steel shafts and double lip sealed

ball bearings.

·       Width of Cut: High density, rubberised.

Optional accessories available for purchase separately include: Mulch Kit: HA124454 - Blades included when purchasing this kit. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. Grass Catcher: HA937458 - 2 bag catcher [non-powered] Steering Lever Extension Kit: HA122760 Flex Forks Kit 48": HA600213 Light Kit: HA120608